12-4
Pressing (E) on the above screen displays the Reset Screen 2 shown below.
• (M&S) ... {main memory data and storage memory
data clear}*
• (ALL) ... {all memory clear}*
• (SD) ... {SD card format} (fx-9860G
II SD only)
* Not included on the fx-7400G
II/fx-9750GII.
The following table shows the functions of the function keys. You can use the function keys
to delete the specific data you want.
Function Key Functions
Initialize
Setup
Information
Delete Main
Memory Data
Delete Add-in
Applications
Delete Storage
Memory Data
(Excluding Add-in
Applications)
Format
SD Card
(STUP)
5
(MAIN)
55
(ADD)
5
(SMEM)
5
(A&S)
55
(E)(M&S)
55 5
(E)(ALL)
55 5 5
(E)(SD)
5
2. Press the function key that corresponds to the reset operation you want to perform.
3. In response to the confirmation message that appears, press (Yes) to perform the reset
operation you specified, or (No) to cancel.
4. A message appears to let you know when the reset operation is complete.
Screen produced when
(MAIN) is pressed in step 2.
Screen produced when
(MAIN) is pressed in step 2.
To Next Page
Loading...
