13-5
1. On the receiver’s data communication main menu, press
(WAKE).
This displays the Wakeup setting screen.
•{On} ... {turns Wakeup on}
•{Off} ... {turns Wakeup off}
2. Press (On).
This turns on Wakeup and returns of the data communication main menu.
3. Turn off the receiver.
4. Connect the receiver to the sender.
5. Starting a send operation on the sender causes the receiver to turn on automatically and
performs the data transfer operation.
4. Data Communications Precautions
The following are the types of data items that can be sent.
• Data names marked with an asterisk (*) in the table are not included on the fx-7400G
II.
Data Item Contents Overwrite Check*
1
ALPHA MEM Alpha memory contents No
<CAPTURE> Capture memory group
CAPT
n
Capture memory (1 to 20) data No
CONICS* Conics setting data No
DYNA MEM* Dynamic Graph functions Yes
EQUATION Equation calculation coefficient values No
E-CON2* E-CON2 setup memory contents No
FINANCIAL* Financial data No
<F-MEM> Function memory group
F-MEM
n
Function memory (1 to 20) contents No
<G-MEM> Graph memory group
G-MEM
n
Graph memory (1 to 20) contents Yes
<LISTFILE> List file group
LIST
n
List memory (1 to 26, and Ans) contents Yes
LIST FILE
n
List file memory (1 to 6) contents Yes
<MATRIX>* Matrix group
MAT
n*
Matrix memory (A to Z, and Ans) contents Yes
<PICTURE> Picture memory group
PICT
n
Picture (graph) memory (1 to 20) data No
<PROGRAM> Program group
Program names Program contents (All programs are listed.) Yes
To Next Page
Loading...
Need help?
General
