20051101
k Inserting an Econ Strip into an eActivity File
The following procedure assumes that the eActivity file into which you want to insert the
Econ strip is already open. For information about creating a new file and other basic eActivity
operations, see “Basic eActivity File Operation” (page 10-1-5) in the manual that comes with
the fx-9860G SD or fx-9860G.
uu
uu
u
To insert an Econ Strip into an eActivity file
1. On the eActivity workspace screen, move the cursor the location where you want to insert
the Econ strip.
2. Press 2(STRP).
• This will display a dialog box with a list of insertable strips.
12-2
Calling E-CON2 Functions from an eActivity
3. Use f and c to move the highlighting to the type of Econ strip you want to insert.
• See the beginning of this section (page 12-1) for details about each Econ strip type.
4. Press w.
• The strip is inserted above the line or the strip where the cursor is currently located.
5. Enter up to 16 characters for the strip title.
To Next Page
Loading...
Need help?
General
