Casio FX-7700GE Service Manual

— 15 —
= = TRANSMIT = =
BACK UP
YES
NO
F1 F6
= = TRANSMITTING = =
BACK UP
TO STOP : [ AC ]
4-5. USING PROGRAM TO SEND PROGRAM DATA
The following procedures show how to send program data from one fx-7700GE unit to another. You can
specify one specific program or all programs for the communication operation.
• To send all PROGRAM data
Send Unit
Starting from the LINK Mode, press
F1
(TRN) to enter
the send mode.
Move the pointer to Program, and press
EXE
to
specify it as the data type.
EXE
• To back up all data
Send Unit
Starting from the LINK Mode, press
F1
(TRN) to enter
the send mode.
Move the pointer to Back Up, and press
EXE
to
specify it as the data type.
EXE
Press
F1
(YES) to start the send operation, or
F6
(NO) to abort without sending anything.
F1
(YES)
* Pressing
AC
interrupts the send operation and
returns to the LINK Mode.
Receive Unit
Starting from the LINK Mode, press
F2
(RCV) to
enter the receive mode.
Move the pointer to Program, and press
EXE
to
specify it as the data type.
EXE
Receive Unit
Starting from the LINK Mode, press
F2
(RCV) to
enter the receive mode.
Move the pointer to Back Up, and press
EXE
to
specify it as the data type.
EXE
Press
F1
(YES) to start the send operation, or
F6
(NO) to abort without receiving anything.
F1
(YES)
*Pressing
AC
interrupts the receive operation and
returns to the LINK Mode.
= = RECEIVING = =
BACK UP
TO STOP : [ AC ]
= = TRANSMIT = =
PROGRAM
F1 F2
ALL ONE
= = RECEIVE = =
PROGRAM
F1 F2
ONEALL
= = RECEIVE = =
BACK UP
YES
NO
F1 F6

Casio FX-7700GE Specifications

General

Display Type	LCD
Number of Functions	320
Dimensions	19.5(H) x 81.5(W) x 161.5(D) mm
Power	Solar and battery
Algebraic logic	Yes
Fractions	Yes
Regression	Yes
Graphing	Yes
Equation solver	Yes
Power Source	Solar and battery
Type	Graphing