Casio fx-9910NG PLUS - Independent Memory (M); Clearing the Contents of All Memories

To recall the contents of variable A
(Continuing) (A) 8
To clear the contents of variable A
0 (STO) (A) 0
Independent Memory (M)
You can add calculation results to or subtract results from independent
memory
.
The "M" indicator appears on the display when there is any value other
than zero stored in independent memory.
Example:
To clear the contents of M
0
(STO) (M) 0
To add the result of 10 × 5 to M
(Continuing) 10 5 50
To subtract the result of 10 + 5 from M
(Continuing) 10 5 (M-) 15
To recall the contents of M
(Continuing) (M) 35
Note
• Variable M is used for independent memory.
Clearing the Contents of All Memories
Ans memory
, independent memory
, and variable contents are retained
even if you press
, change the calculation mode, or turn off the
calculator.
Perform the following procedure when you want to clear the contents of all
memories.
(CLR) (Memory) (Yes)
26