EN-41
To calculate binomial probability for the sample data {10, 11, 12, 13,
14} when N=15 and p=0.6
Nc1(DIST)4(Binomial PD)
Display the List Screen: 1(List)
• To specify data using parameter format, press 2(Var).
10 = 11 = 12 = 13 = 14 =
=
15 =
0.6 =
ecccc
Results:
x = binomial probability of 10 ⱌ 0.18594
x = binomial probability of 11 ⱌ 0.12678
x = binomial probability of 12 ⱌ 0.063388
x = binomial probability of 13 ⱌ 0.021942
x = binomial probability of 14 ⱌ 4.7018 × 10
−3
• Pressing = returns to the N input screen. Pressing A returns to the List
Screen (input data samples are stored).
Note • The following cannot be used in the distribution calculations: Pol,
Rec, ∫,
d/dx. • When data is specified using parameter format, calculation
results are stored in Ans memory. • An error message appears if the input
value is outside the allowable range. “ERROR” will appear in the Ans column
of the List Screen when the value input for the corresponding sample data is
outside the allowable range.
To Next Page
Loading...
