EN-8
• When inputting a function that uses commas (such as Pol, Rec, and
RanInt#), be sure to input the closed parentheses required by the
expression. If you do not input closed parentheses, parentheses may not
be inserted automatically as described above.
Important: If you execute a calculation in which a multiplication sign has been
omitted immediately before a fraction (including mixed fractions), parentheses
will be inserted automatically as shown in the examples below.
1
2 ×
3
: B
' 1 c 3 dddd 2
=
4
sin(30) ×
5
: B
' 4 c 5 dddds 30 )
=
Note: • If the calculation becomes longer than the screen width during
input, the screen will scroll automatically to the right and the ] indicator will
appear on the display. When this happens, you can scroll back to the left by
using d and e to move the cursor. • When Linear Display is selected,
pressing f will cause the cursor to jump to the beginning of the calculation,
while c will jump to the end. • When Natural Display is selected, pressing
e while the cursor is at the end of the input calculation will cause it to jump
to the beginning, while pressing d while the cursor is at the beginning will
cause it to jump to the end. • You can input up to 99 bytes for a calculation.
Each numeral, symbol, or function normally uses one byte. Some functions
require three to 13 bytes. • The cursor will change shape to k when there are
10 bytes or less of allowed input remaining. If this happens, end calculation
input and then press =.
Calculation Priority Sequence
The priority sequence of input calculations is evaluated in accordance with the
rules below. When the priority of two expressions is the same, the calculation
is performed from left to right.
1st
Parenthetical expressions
2nd
Functions that require an argument to the right and a closing
parenthesis “)” following the argument.
3rd
Functions that come after the input value (
x
2
, x
3
, x
–1
, x!, °’ ”, °,
r
,
g
,
%, '
t), powers (x^), roots (")
4th
Fractions
MathMath
MathMath
MathMath
MathMath