EN-12
Home Folder
The home folder is where fx-CG500 Manager creates your default document.
You can also use the home folder as a fx-CG500 Storage area. Storing an XCP, VCP, C2P, C2B,
or C2A file in the fx-CG500 Storage area will make it available for use by fx-CG500 Manager. For
details about the Storage area and XCP/VCP/C2P/C2B/C2A files, see the fx-CG500 User’s Guide.
By default, the home folder is located in Documents\CASIO\fx-CG500 Manager.
Q To change the home folder
1. Right-click anywhere within the fx-CG500 Manager, and then click [File] - [Change Home
Folder] on the shortcut menu that appears.
• This will display a Home Folder dialog box like the one shown below.
2. Click [Browse].
• This displays the Browse Folder dialog box.
3. Select the folder you want to use as the home folder and then click [OK].
• This returns to the Home Folder dialog box.
4. Click [OK].
• This registers the folder you selected in step 3 as your home folder.
Clearing Main Memory (Reset)
Q To clear all data, except for eActivity files
1. Right-click anywhere within the fx-CG500 Manager, and then click [File] - [Reset] on the
shortcut menu that appears.
• This will display a confirmation dialog box with the message “Reset Memory? Are you sure?”.
2. To clear memory, click [Yes]. To cancel the operation without clearing anything, click [No].
To Next Page
Loading...
Need help?
General
