EN-1
Getting Started
• You can use fx-CG500 Manager to develop programs and eActivities using the same commands
as those available on the fx-CG500. You can store your programs and eActivities on your
computer.
• fx-CG500 Manager provides the following capabilities.
·
fx-CG500 emulation, which lets you perform fx-CG500 operations on your computer
·
fx-CG500 emulation screen capture (to the clipboard) and screen printing
·
Copy and paste of data (text, values, expressions, etc.) between fx-CG500 Manager and
other applications
Note
• See your fx-CG500 User’s Guide for details about operating the on-screen fx-CG500 unit
emulator.
• The explanations in this manual cover both Windows and Mac OS. Most of the screen shots are
from Windows 8.1, but operational procedures are virtually identical for both Windows and Mac
OS.
• Mac OS: Where instructed to “right-click” in the text of this manual, Mac OS users should
“control+click”.
•
Display examples shown in this User’s Guide are intended for illustrative purposes only.
The actual text and values that appear on display may differ from the examples shown in this User’s
Guide.
• Some operations may differ from those described in the manual depending on the OS or language
installed on your PC.
To Next Page
Loading...
Need help?
General
