Casio IT-G500 User Manual

– 35 –
IT-G500
Manual Test
DC power supply unit
DC ammeter
Turn the right lock switch for the battery pack cover to the “LOCK” position.
Diode
(IF=3.0 A Max.)
DC voltmeter

Y
Low Voltage Detection
No. Operation Test Details
1
Select [6].Low Voltage Detection. (MENU-5)
Adjust the DC power supply output to 3.3 V and
press the “ENT” key.
IT-G500 automatically turns OFF.
2
Adjust the DC power supply output to 3.7 V and
turn ON IT-G500.
If OK:
The screen returns to the menu screen.
If any problem:
An error indication is displayed.
Press the “ENT” key to return to the menu
screen.

Y
Current - W-LAN
No. Operation Test Details
1
Select [3].Current - W-LAN. (MENU-5) Check that the current value is within 350 to
450 mA.
If OK:
The screen returns to the menu screen.
If any problem:
An error indication is displayed.
Press the “ENT” key to return to the menu
screen.

Casio IT-G500 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	CMOS
Scanner type	2D
Tilt reading angle	0 - 25 °
Optical sensor resolution	0.25 pixels
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, MSI
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, MicroPDF417, QR Code
Battery voltage	3.7 V
Power source type	Battery
Battery technology	Lithium
USB version	2.0
Standard interfaces	USB, Bluetooth, Wireless LAN
Connectivity technology	Wireless
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
RAM capacity	512 MB
Keys quantity	22 keys
Product color	Black
LED indicators	Charging, Status
Internal memory	4000 MB
Built-in display	Yes
Housing material	-
Display resolution	480 x 800 pixels
Display technology	LCD/TFT
Processor frequency	1.5 MHz
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IP67

Weight and Dimensions

Depth	22 mm
Width	74 mm
Height	175 mm
Weight	270 g