— 22 —
2. Erratic display
9. TROUBLESHOOTING
1. Intermittent display
Replace
Y
Y
N
N
Resolder
Resolder
Y
Y
Is the soldering weak ?
N
N
Clean and adjust pressure of contact
START
Is the battery contact weak ?
Are there short circuit around the pins
of the LSI (HC3000-08-F1) ?
Is the Heat seal defective ?
Replace the Z807-1 PCB ass'y.
Are there short circuit around the pins of the
LSI (HC3000-06-F1) or between the pins of
the crystal oscillator (·2) ?
Replace
Y
N
Y
Replace
Check or replace the chip
capacitors C4 ~ C8
N
N
Y
N
N
Resolder
Resolder
Y
Y
START
Are there short circuit around
the pins of the RAM and ROM ?
Are the voltage V0 ~ V4 OK ?
Is the Heat seal defective ?
Is the LCD defective ?
Replace the Z807-1 PCB ass'y.
To Next Page
Loading...
Need help?
General