Casio keyboard PX-320

Other Settings
E-33
To change the setting of one of the
EFFECT button parameters
Press the EFFECT button in step 3 of the “To configure
other settings” procedure to toggle between the two
parameters shown below.
To change the setting of one of the MIDI
button parameters
Press the MIDI button in step 3 of the “To configure
other settings” procedure to cycle between the
parameters shown below.
To change the setting of one of the
OTHERS button parameters
Press the OTHERS button in step 3 of the “To
configure other settings” procedure to cycle between
the parameters shown below.
Brilliance parameter
(“b” stands for “brilliance”.)
Acoustic Resonance parameter
(“A” stands for “acoustic”.)
Send Channel setting
(“C” stands for “channel”.)
Accomp MIDI Out setting
(“o” stands for “out”.)
MIDI In Chord Judge setting
(“J” stands for “judge”.)
Local Control setting
(“L” stands for “local”.)
Pre-count setting
(“P” stands for “pre-count”.)
Soft/Sostenuto pedal jack setting
(“J” stands for “jack”.)
Damper pedal adjustment
(half-damper) setting
(“H” stands for “half”.)
Registration Filter setting
(“F” stands for “filter”.)
Setup Memory setting
(“S” stands for “setup”.)
Operation Lock setting
(“L” stands for “lock”.)
PX320_e.book 33 ページ ２００７年８月１日 水曜日 午前９時２８分