E-34
Other Settings
Tones
* Split Point Key Name Display
Secondary Parameter Reference
Setting Parameter Name Settings Description
VARIOUS/GM
TONES button
assignment
TONE SEL See “Tone List” on page
A-1.
Assigns one of the digital piano’s Various tone, GM
tone, or Drum set to the VARIOUS/GM TONES
button.
Tone layering volume
balance
LAYER BAL –24 to 0 to 24 Specifies the volume balance between the main and
layered tones. A lower value reduces the volume level
of the layered tone.
NOTE
• The tone layering volume balance can not be
changed in the Duet Mode.
Split point SPLIT POINT A0 to C8* See page E-12.
Reverb type REV TYPE 1 to 4 See page E-13.
Chorus type CHOR TYPE 1 to 4 See page E-13.
Brilliance level EFFECT b.–3 to b.0 to b.3 See page E-11.
Acoustic Resonance EFFECT A.oF: Off
A.on: On
When the damper pedal is pressed, acoustic resonance
reproduces the harmonic resonance similar to that of a
grand piano. This parameter turns acoustic resonance
on or off. When configuring the setting of this
parameter, use the procedure under “To change the
setting of one of the EFFECT button parameters” on
page E-33.
NOTE
• Whether or not this effect can be applied depends
on the tone. For details, see “Tone List” on page
A-1.
Display
Settings ABCDEFGF
I
3B
i
5
PX320_e.book 34 ページ ２００７年８月１日 水曜日 午前９時２８分
To Next Page
Loading...
Need help?
General
