EasyManuals Logo

Casio keyboard PX-320 User Manual

Casio keyboard PX-320
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
E-46
Using an SD Memory Card
To transfer song data from an SD memory
card to the recorder area
1.
Press the RECORDER button so the PLAY
lamp is lit.
2.
Use the T/NO and S/YES buttons to display
the number of the recorder area song (1
through 5) to which you want to transfer the
song data.
3.
Hold down the CARD button until its lamp
starts to flash slowly and “Ldr” (load recorder
area) appears on the display.
4.
Use the T/NO and S/YES buttons to display
the file number of the song data you want to
transfer to digital piano memory.
5.
When everything is the way you want, press
the FUNCTION button to begin data transfer.
The message “CPL” (complete) will appear on the
display to let you know when data transfer is
complete. The number of the recorder area song to
which the data was transferred will be shown on the
display.
z To interrupt an ongoing data transfer operation,
press the CARD button.
z If the recorder area song number you select contains
data already, pressing the FUNCTION button in
step 5 will display “rEP” (replace) to confirm that
you want to replace the existing data with the data
you are transferring. Press the S/YES button to
overwrite the data or the T/NO button to cancel.
To transfer registration data from an SD
memory card to the registration area
1.
Press the TONE/REGISTRATION button so
the registration lamp is lit.
2.
Hold down the CARD button until its lamp
starts to flash slowly and “LdG” (load
registration area) appears on the display.
3.
Use the T/NO and S/YES buttons to display
the file number of the registration data you
want to transfer to digital piano memory.
4.
When everything is the way you want, press
the FUNCTION button to begin data transfer.
The message “rEP” (replace) will appear to confirm
that you wish to overwrite existing data. Press the
S/YES button to recall the data. The message “CPL”
(complete) will appear when data transfer is
complete. To cancel the transfer operation, press the
T/NO button.
z You can cancel the above operation any time before
you press the FUNCTION button by pressing the
CARD button twice.
This mark indicates that the currently displayed song
number has data stored already.
PX320_e.book 46 ージ 078月日 曜日 午前時2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio keyboard PX-320 and is the answer not in the manual?

Casio keyboard PX-320 Specifications

General IconGeneral
BrandCasio
Modelkeyboard PX-320
CategoryElectronic Keyboard
LanguageEnglish

Related product manuals