E-46
Page E-26
Page E-26
Page E-26
Page E-26
Page E-41
Page E-40
Page E-40
(1) Use a recommended type
microphone.
(2) Move the microphone away
from source of the static.
(1) Increase the microphone
volume setting.
(2) Change the microphone ON/
OFF switch setting to ON.
(1) Correctly insert the card into the
card slot.
(2) Use only a card of the voltage
and capacity specified for this
keyboard.
(3) Use a different card.
(1) Use of a microphone that is a
different from the type that is
recommended.
(2) Use of the microphone in the
vicinity of fluorescent lighting.
(1) Microphone volume setting is
too low.
(2) Microphone ON/OFF switch is
set to OFF.
(1) The card is not inserted
correctly into the card slot.
(2) You are trying to use a card
whose voltage or capacity is
not supported by this
keyboard.
(3) The card is damaged.
Static noise when a microphone is
connected.
No microphone sound
Cannot recall data from a card.
653A-E-048A
Troubleshooting
Problem Possible Cause See pageAction
LK70S_e_45-47.p65 04.8.18, 11:04 AM46
To Next Page
Loading...
Need help?
General
