SE-G1/PCR-T273/SM-T274
– 2 –
2. INITIALIZATION
(1) Remove the memory protection batteries.
Memory protection batteries
(2) If the Power cord is plugged to a power outlet, unplug it.
(3) Wait for 15 seconds, and set the memory protection batteries again.
(4) Set the paper.
NOTE: Unless the paper is set, Error "E 10" is triggered and the program cannot be launched.
(5) Plug the Power cord to a power outlet.
(6) Enter year, month, day, and time.
NOTE: For US, enter month, day, and year in this order.
For other regions, enter day, month, and year in this order.
To Next Page
Loading...
