SE-G1/PCR-T273/SM-T274
– 7 –
C. MAIN-UNIT M-type
C-1. Remove the cable tie.
C-2. Pull the drawer release lever and then remove the drawer.
NOTE: In case the drawer is locked with a drawer lock key, the lever does not activate.
NOTES ON ASSEMBLY
• Be sure to attach the cable tie.
C-3. Undo three screws and two plates.
Screws(S3)
Plates
C-4. Slide the MAIN UNIT toward the back. Disengage the MAIN UNIT as you pull out the AC power
cord.
Drawer release lever
Cable tie
Pull out the AC power cord.
To Next Page
Loading...
