E-16
To use the cash register’s basic function
Mode keys
There are two types of mode keys: the program key (marked “PGM”) and the operator key (marked
“OP”). The program key can be used to set the mode switch to any position, while the operator key can
select the REG and OFF position.
PGM
OP
PGM RF OFF REG X Z X2/Z2
OP key
--
---
PGM key
Drawer The drawer opens automatically whenever you fi nalize a registration and
whenever you issue a read or reset report. The drawer will not open if it is
locked with the drawer key.
Drawer key Use this key to lock and unlock the drawer.
Magnetic plate Use this plate for tacking the notes received from customer.
To adjust the main display
1 Put in fi ngers in the ditch of the main display and tilt it
to the angle you can see clearly.
To set the customer display
1 Lift the customer display until it stops.
2 Rotate the display so that customers can see it.
SES800INC-e.indbE-16SES800INC-e.indbE-16 2013/10/0113:04:582013/10/0113:04:58
To Next Page
Loading...
Need help?
General
