25
E
Adjusting Display Contrast
Use the following procedure to make the characters on the display darker or
lighter.
To change the display contrast
1. Press SET UP to display the SET UP menu.
2. Use x and z to select CONTRAST, and then press SET.
3. Use c and v to adjust display contrast.
4. After contrast is the way you want, press SET to exit the adjustment screen.
Turning Sound On and Off
The label printer is equipped with sound capabilities that signal when power is
turned on and when an illegal operation is attempted. Normally, sound is turned
on whenever you turn power on, but you can use the following procedure to
turn the sound on and off.
To turn sound on or off
1. Press SET UP to display the SET UP menu.
2. Use x and z to select SOUND, and then press SET.
3. Use x and z to select the setting you want (ON or OFF), and then press
SET.
To Next Page
Loading...
