EN-5
1.
Hold down the bp^ button until “[FUNCTION]”
appears on the display. Then release the
button.
This enters the FUNCTION mode.
2.
Use the bk U and bl I buttons to display
“WIRELESS”, and then touch bm ENTER.
3.
Use the bk U and bl I buttons to display
“Connection Stat”, and then touch bm ENTER.
The current connection status is shown in the third line of
the display.
4.
To exit the FUNCTION mode, hold down
bp EXIT until “[FUNCTION]” disappears from
the display.
Connection requires commercially available connecting cords,
supplied by you.
• The connecting cords should have a 3-pole stereo mini plug
on one end and a plug that matches the configuration of the
external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If external device notes that sound through the Digital
Piano speakers are distorted, lower the external
device’s volume level setting.
■ AUDIO IN Jack Input Volume Level Adjustment
and Center Cancel
When you play audio from an external source connected to
the ct AUDIO IN jack through the Digital Piano’s speakers,
you can adjust the volume level and even perform center
cancel, which cuts the vocal part.
Checking the Bluetooth
Connection Status
Indicator Description
MIDI:C, Audio:C Bluetooth Low Energy MIDI
device and Bluetooth Audio-
capable device both connected.
MIDI:C, Audio:– Bluetooth Low Energy MIDI
device connected, Bluetooth
Audio-capable device not
connected.
MIDI:–, Audio:C Bluetooth Low Energy MIDI
device not connected, Bluetooth
Audio-capable device
connected.
MIDI:–, Audio:– Bluetooth Low Energy MIDI
device and Bluetooth Audio-
capable device both not
connected.
Playing Sound from External
Audio Equipment Through the
Digital Piano’s Speakers
3-pole stereo mini plug
ct AUDIO IN jack (Stereo mini jack (3.5mm))
Portable audio player, etc.