Casio QG-100 - Page 20

— 18 —
2. Insert this jig to the 3pin jack of QG-
100, then turn on QG-100 power while
pressing + and - button at the same
time. Then, LED1 shines (green).
3. Remove this jig.
4. Turn on QV camera power.
5. Connect QG-100 to QV camera using
SB-62 communication cable.
POWER
LED1
ON
OFF
LED2
SHIFT
MINILABEL
DISP
MODE
PRINT
CUT
5. MEMORY CHECK
Press + button.
CHECK ITEM QV CAMERA'S DISPLAY
1 ROM (SUM Check) For example,
2 S-RAM Check
3 PS-RAM1 Check
4 PS-RAM2 Check
O : OK
X : NG
1 O DA37h
2 O
3 O
4 O