Casio QG-100 - Page 21

— 19 —
8. KEY & LED CHECK
PROCEDURE CHECK
NO. ITEM
1 Press SHIFT button, No display
then + button.
2 KEY Press SHIFT button. SH
3 Press MINI LABEL SH
button. MI
4 Press + button. SH
MI
+
5 Press - button. SH
MI
+
-
 SH
6 Press PRINT button. MI
+
-
PR
LED
7 Both LED1 and LED2 does not shine.
8 Press no button. LED1 shines(green). LED2 do not shine.
9 LED LED1 shines(red). LED2 do not shine.
10 LED1 do not shines. LED2 shines(green).
11 LED1 shines(green). LED2 do not shine.
7. HEAD RANK, THERMISTOR TEMPERATURE, TAPE WIDTH & CONTRST CHECK
Set any color tape cartridge into QG-100, then press - button.
CHECK ITEM QV CAMERA'S DISPLAY
1 HEAD RANK For example,
2 THERMISTOR TEMPATURE
3 TAPE WIDTH No tape cartridge
4 CONTRAST ➝ 3

Head rank: 6, Temperature of thermistor: 28 degree C
Tape width: 46mm, Contrast: 2 (1~5)
1 6
2 28
3 C46
4 2
OPERATION QV CAMERA'S DISPLAY