R-152
Registration
Add on code
QT-6600 has a capability to log the supplemental (add-on) barcode data with main
barcode.
The add-on code is logged to the Add on/ VMP file (file-040) with main barcode, shop
code, consecutive number, date, time and item quantity.
The barcode data of the main item should be programmed to the Non PLU table.
Shop code is programmed to the 48-th record of the general control file.
Multi EAN link
If you want to register an item as the item with different barcode data, program the barcode
data of the linked item and the parent item to the multi EAN link file (file no. = 075).
Refer to 4-4-3 Programming multi EAN link of the programming manual.
To Next Page
Loading...
Need help?
General
