E. Programming Keys
A. PLU Description Changes/Additions
This is the best way to make multiple changes or review your items as you
can change/add prices, descriptions and departments here
1. PRESS MODE Button
2 PRESS PGM1 button (PGM-1 menu on display)
3. PRESS Yes on 1. Unit Price/Qty
4. PRESS Arrow down to 11. PLU-DEPT-PGM
5. PRESS Yes
6. PRESS Arrow Down or Page Down to reach desired
PLU item (remember this number)
7. PRESS Yes to select PLU item
8. PRESS Arrow Down to “Descriptor”
9. PRESS Yes to select
10 TYPE in desired description
11. PRESS Yes to confirm
optional -Price
12. PRESS Arrow to “Price”
13. ENTER Price (no decimal point required)
optional – Department Link
14. PRESS Arrow to “Dept Link”
15. PRESS Yes to select Department Link
16. PRESS Arrow Down to select Department Link for PLU item
If the department is set to kitchen print this item will no print automatically
optional – Linking Item to a Pop-up or Kitchen Instruction
17. PRESS Arrow Down to “List Link #1”
18. PRESS Yes
19. PRESS Arrow Down to select the Pop-up you wish to use
20. PRESS Yes
21. PRESS ESC ESC ESC to return to PGM 3 screen
22. PRESS MODE then REG to return to register operation
To Next Page
Loading...
Need help?
General
