B. Adding PLU’s to the keyboard
To add this item to the keyboard: (where you know the PLU number x)
1. PRESS Mode and then PGM4
2. PRESS Yes on 1. Keyboard
3. PRESS Yes on 1. Key Assign
4. ENTER x063 where x is the PLU number (ie. PLU 101 would be
101063)
5. PRESS The space where you want to add this key
6. PRESS ESC back to PGM4
7. PRESS the other menu buttons to check this button has not appeared
on
other menus
8. IF it has choose 1. Keyboard and 4. Key Delete
9. PRESS the key to be deleted
10. REPEAT for all extra un-required keys
11. PRESS Mode and REG to return to normal operation
C. Changing a Clerk Name
1. PRESS PGM button
2. ENTER 3
3. PRESS PGM button (PGM-3 menu on display)
4. PRESS Arrow Down to No. 2 option – Clerk
5. PRESS Yes
6. PRESS Arrow Down to Clerk number to edit
7. PRESS Yes
8. PRESS Yes to confirm Clerk Descriptor
9. TYPE Desired clerk name
10. ENTER Sign On number (if required, or leave as
default)
11. PRESS ESC ESC ESC
12. PRESS REG mode to return to register operation
To Next Page
Loading...
Need help?
General
