– 26 –
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
[7] Display Test
[Function]
Tests the Main Display and the Customer Display.
[Operation]
All test procedures are the same for both tests except for the input command.
Main Display Command : n
0
2
1
k
Customer Display Command : n
0
2
2
k
n: Number of times to run
0 Once (Can be omitted)
1 ~ 9 Infi nite loop (To forcibly terminate the test, press the
C
key.)
Pressing any key changes the display
.
Main Display Customer Display
Any key
Any key
Any key
Any key
Any key
Any key
ABCDEFGHIJKLMNOPQRST
ABCDEFGHIJKLMNOPQRST
[Display of the Result]
DISP OK
[Printout of the Result]
Main Display Customer Display
DISP 21
DISP OK
END 21
DISP 22
DISP OK
END 22
To Next Page
Loading...
Need help?
General
