– 25 –
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
[6] SD Card Test (Write/Read, Report)
[6-1] SD Card Write/Read Test
[Function]
Writes the text fi le for the test (test.txt) on the SD card and tests whether the written fi le can be read.
[IMPORTANT]
The test result shows NG if you use a write-protected SD card.
The text fi le written during the test (test.txt) will not be erased.
If the SD card contains a fi le with the same name (test.txt), delete "text.txt" fi le fi rst before
performing the SD card check.
[Operation]
Command : n
0
1
4
k
n: Number of times to run
0 Once (Can be omitted)
1 ~ 9 Infi nite loop (To forcibly terminate the test, press the
C
key.)
[Display of the Result]
SD WR OK
[Printout of the Result]
SD 14
SD WR OK
END 14
[6-1] SD Card Report
[Function]
Prints out the memory size of the SD card and its write-protection status.
[Operation]
Command : n
6
1
4
k
n: Number of times to run
0 Once (Can be omitted)
1 ~ 9 Infi nite loop (To forcibly terminate the test, press the
C
key.)
[Display of the Result]
SD SIZE OK
[Printout of the Result]
SD 614
Size = 3767 MB
WriteProtect = OFF
SD SIZE OK
END 614