How to fix error E01 on Casio Cash Register?
If E01 appears on the display of your Casio Cash Register, it means you are changing modes without completing a transaction. Return the mode switch to where it stops buzzing and press p.
Why is programming lost on my Casio Cash Register?
If the programming is lost whenever the Casio Cash Register is unplugged or at power failure, the cause may be poor or no batteries. To solve this, put in new batteries and program again.
How to clear totals on Casio SE-G1 Cash Register?
If you are not clearing totals at the end of the day after taking a report on your Casio Cash Register, you are likely using X mode to print reports. Use Z mode to print reports instead.
What to do if error E10 appears on Casio SE-G1 Cash Register?
If E10 appears on the display of your Casio Cash Register, it indicates a printer error. Turn the register off, remove the paper, and then turn it back on.
General| Clerk lock | Yes |
|---|---|
| Memory type | Flash ROM |
| Number of users | 8 user(s) |
| Keyboard number of keys | 34 |
| Supported paper width | 58 mm |
| Backlight | No |
| Display digits | 8 digits |
| Display number of lines | 1 lines |
| Second display number of characters | 8 |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | AC |
| Power consumption | 100 mA |
Weight and Dimensions| Depth | 345 mm |
|---|---|
| Width | 326 mm |
| Height | 167 mm |
| Weight | 3500 g |
To Next Page
