Casio TE-3000S - Page 41

— 39 —
[ 5 ] CF-CARD WRITE/READ test
[Function]
This test will check the write/read test (connection test) for CF-CARD.
Perform the CF-CARD clear test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 0 1 3 SUBTOTAL
p : designates PCMCIA SLOT
0 = CF
1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “C” key)
[PRINT]
CF pn013
CF WR OK
END pn013
NG and the address are printed if WRITE cannot be done
normally.
[ 6 ] CF-CARD READ ONLY test
[Function]
This test will check the read only test for CF-CARD.
Perform the CF-CARD write test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 1 1 3 SUBTOTAL
p: designates PCMCIA SLOT
0 = CF
1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “C” key)
[PRINT]
CF-CARD pn113
CF RD OK
END pn113
NG and the address are printed if READ cannot be done
normally.