— 57 —
ActionMeaning
Prompt message
E100
E101
E105
E106
E121
E139
E140
E146
E200
E203
E205
Operate at the
master terminal
PLU maintenance
file full. Press
<#2> to exit
PLU file full
Item exists in
the PLU FILE
Inline startup
error
Negative balance
is not allowed
Wrong menu
Arrangement file
full
Insert CF card
Insufficient
memory
File already
exist.
Prohibit master operation.
Scanning PLU direct maintenance/batch
maintenance file becomes full.
Scanning PLU/not found PLU file full
The designated item has already existed
in the scanning PLU file.
Network startup error.
Attempt to register <–> or <CPN> when
the balance becomes negative.
This sheet holder is prohibited by PGM.
Arrangement file is full.
No CF card is set.
Insufficient memory in the CF card.
Can not write, because designated file
has already been in the CF card.
Perform it at master terminal.
Terminate the maintenance.
Modify the designated item.
Enter proper minus/coupon amount.
Set correct sheet holder.
Set the arrangement properly.
Set CF card.
Use a vacant (formatted) CF card.
Check the operation and retry.
To Next Page
Loading...
