Advanced Operations
74
E
Currency exchange function
When <CE> (currency exchange key) and <ST> are pressed, a current subtotal including tax is converted into
foreign currency and the result is displayed.
Before using the currency exchange function, it is necessary to program the conversion rate and foreign
currency amount symbol.
Registering foreign currency
Full amount tender in a foreign currency
* Pre-programmed exchange rate: ¥ 100 = $0.9524
Important!
Tenders in a foreign currency can be registered using the a and k only.
Other finalize keys cannot be used.
OPERATION DISPLAY
5 Enter the unit price and press the
applicable flat-PLU key.
5 Enter the next unit price and press
the applicable flat-PLU key.
5 Press
E and s without en-
tering a numeric value. This op-
eration converts the subtotal (in-
cluding tax) dollar value into yen
by applying a pre-programmed ex-
change rate. The result is shown
on the display and printed on the
receipt/journal by programming.
5 Press
E and enter the amount
tendered in yen. This operation
converts the entered yen amount
into dollars by applying a pre-
programmed exchange rate. The
result is shown on the display.
5 Press to finalize the transaction.
Note that you do not need to reen-
ter the dollar amount.
The register automatically calcu-
lates the change amount due in
dollars and shows it on the dis-
play, receipts and journal.
10-(
20-)
Es
E50-
a
REG 03-04-2003 17:00
C
01 MC #01 001150
1 PLU0001 •10.00
2 DEPT02 •20.00
TL
•30.00
CE
CASH ¥5,000
CASH •47.62
CG •17.62
REG
C
01 03-04-03 17:00 001150
1 PLU0001 •10.00
1 PLU0002 •20.00
TL
•30.00
CE
CASH ¥5,000
CASH •47.62
CG •17.62
CG •17.62
RECEIPT
(¥5,000)
To Next Page
Loading...
Need help?
General
