— 54 —
[ 16 ] Internal printer print test
[Function]
This test will check the characters in the receipt/journal of the internal printer.
[Operation]
Operation : c n 0 3 d SUBTOTAL
c: 0 = prints character’ B’
1 = prints all characters
n: 0 = One time check (Can be omitted)
not 0 = Continuous check (To stop the test, press “Esc” key)
d: 3 = prints only receipt
4 = prints only journal
5 = prints both receipt/journal (prints alternately)
[LCD]
PRT cn03d
END cn03d
[Print]
1. prints character’ B’
2. prints all characters
Refer to the figure in the next page for the characters to be printed.
The printing order is in the order of the character code. The characters from 0x20(SP) to 0xFA(•)
are printed.
A space is printed for a code without the printing character.
A character which cannot be printed is a character within the range of the code 0x00 to 0x1F and
0xFB to 0xFF.
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
To Next Page
Loading...
Need help?
General
