Using the Function Menu
E-97
Specifies the how arpeggio is played in accordance with
pressed keyboard keys when the arpeggiator (page E-23) is
being used.
• When “on” is selected for this setting, you can turn off
arpeggio play pressing the R-18 (AUTO HARMONIZE/
ARPEGGIATOR) button to disable the arpeggiator, or you
can change this setting to “oFF”.
Specifies how many times notes or chords should sound
within one beat for arpeggio phrases played by the
arpeggiator (page E-23).
1, 2, 2S, 3, 4
*
, 4S, 6, 8
The setting value indicates the number of times within one
beat. Selecting an option that is only a value will sound the
note that number of times within one beat. Selecting “4”, for
example, will play with the rhythm 7777.
Selecting an option that includes the letter “S” will play a
shuffle. 2S plays and 4S plays .
• The availability of the settings for this item depends on the
arpeggiator type. Refer to the separate “Appendix” for
details.
Specifies whether arpeggiator play with the tone of any part
should be used for the UPPER part keyboard or LOWER part
keyboard when the arpeggiator (page E-23) is used while the
keyboard is used while Layer and/or Split is turned on (page
E-15).
• If “U2” is selected, arpeggios are played when Layer is on
(page E-16).
• If “Low” is selected, arpeggios are played when Split is on
(page E-16).
Specifies if accompaniment settings are recalled (oFF
*
) when
a registration setup (page E-61) is recalled, or if
accompaniment settings are not recalled (on).
Specifies if scale settings are recalled (oFF) when a
registration setup (page E-61) is recalled, or if scale settings
are not recalled (on
*
).
• You can directly display this group screen without going
through the function menu. While in the card mode (page
E-102), hold down the R-13 (FUNCTION) button as you
press the C-13 (MENU) button.
Specifies if a pre-count should sound (on) when playback of a
song file is started in the card mode (page E-102) or if a
pre-count should not sound (oFF
*
).
Specifies if a single song file should be repeat played (on)
during playback in the card mode (page E-102) or if a song file
should not be repeat played (oFF
*
).
You can batch save all user data in Digital Keyboard memory
to a memory card, or load all user data from a memory card to
Digital Keyboard memory.
See “To batch save all Digital Keyboard data to a memory
card” (page E-104) and “To batch load all Digital Keyboard
memory data from a memory card” (page E-105) for more
information.
See “Formatting a Memory Card” (page E-102).
See “To delete a file from a memory card” (page E-106).
See “To rename a file on a memory card” (page E-106).
ArpegHold (Arpeggiator Hold)
oFF
*
: Arpeggio played while the keys of a chord are
depressed on the keyboard
on : Arpeggio played after keyboard keys are released
ArpegSpeed (Arpeggiator Speed)
ArpegPart (Arpeggiator Part)
U12* : UPPER part keyboard, Upper 1 and Upper 2 tones
played.
U1 : UPPER part keyboard, Upper 1 tone played.
U2 : UPPER part keyboard, Upper 2 tone played.
Low : LOWER part keyboard, Lower tone played.
RegFltAcmp (Registration Filter: Accompaniment)
RegFltScal (Registration Filter: Scale)
26
67 67
Play/CardUtl (Playback, Card Utility) Group
PreCount (Song Pre-count Sound)
SongRepeat (Song Repeat Play)
AllData (All Data)
CardFormat (Card Format)
FileDelete (File Delete)
FileRename (File Rename)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
