Moving money forward
12
4. Gently wipe the sensors with a special cleaning cotton swab (or a microfiber cloth/cotton swab
lightly moistened with isopropyl alcohol) as shown below.
5. Clean the dust from the machine using an air duster. Spray the air duster in the following two
areas as shown below. Start with the bottom of the lid.
NOTE: While cleaning the sensors, make sure to not move the
three belts and ensure that they stay properly aligned.
NOTE: Be cautious and keep the nozzle 1-2 inches away from the unit all times.
Magnetic
Sensors
Other
Sensors
To Next Page
Loading...