Cassida Quattro
4-way Automatic Counterfeit Detector
5
To ensure top performance, we have listed the following steps on proper use of the Quattro:
I. Avoid inserting a bill that is:
• Torn
• Heavily Worn
• Crumpled
• Covered with adhesive tape
• Stapled
• Stained
II. Ensure the bill is flat and corners are not folded (the Quattro can recognize the size of a bill and
may reject a bill that is folded or has folded corners).
Ready screen
To power the Quattro, connect the AC/DC adapter to the Cassida Quattro and plug the adapter plug
into the wall. Press the ON/OFF power switch on the back of the unit. The Quattro will run its startup
menu for approximately 3 seconds. When you see this screen, you are ready to insert bills:
1.1 Powering Up
1.2 Feeding Bills
To Next Page
Loading...