To Next PageTo Next Page
Need help?Do you have a question about the Cast OLGA and is the answer not in the manual?
Details minimum clearances required around the stove for safety and proper installation, including wall and floor clearances.
Covers regulations and requirements for the floor or hearth where the stove will be installed, including load bearing capacity.
Information on flue pipe compatibility, shared chimney systems, and the importance of access for cleaning and maintenance.
Guidance on avoiding fume problems, what to do in case of persistent fume emission, and troubleshooting steps for safe operation.
Explanation of the air control mechanism used to regulate heat output and the function of the 'glass wash' feature.
Details on the type of fuel to use (dry, seasoned wood), and a list of fuels that should NOT be burned in the stove.
Pre-lighting checks, including ensuring the flue is clear and the ash pan is in position, and initial firing advice for new stoves.
Step-by-step guide on how to light a wood fire, including using firelighters, managing the door, and refueling with kindling.
Instructions for safely refueling the stove with hot embers, avoiding excessive smoke, and managing fuel load to prevent overloading.
General warning about the high operating temperatures of the stove and its fittings, advising caution and protective measures.
Advice on avoiding overfiring the stove, recognizing signs of overheating, and adjusting air supply to control the burning rate.
Steps to take in the event of a chimney fire, including immediate actions, evacuation, and contacting emergency services.
Information on fume emissions during normal operation and troubleshooting steps, including ventilation and seeking professional advice.
Guidance on cleaning the inside of the stove, recommending protective gear and specific tools for dislodging and removing ash.
Instructions for checking for damaged parts, using authorized spare parts, and the importance of regular maintenance by a competent engineer.
Advice on cleaning and renovating the stove's heat-resistant paint finish, and steps to take if rust becomes apparent.
Instructions for checking and replacing the fire rope around the door and glass seals to ensure an effective seal.
Basic instructions for cleaning the exterior of the stove with a soft brush, and note on flue access for cleaning.
Guidance on cleaning stove glass, avoiding abrasive materials, and procedures for replacing broken glass panes safely.
Troubleshooting common issues preventing the stove from burning, such as wet fuel, blocked inlets, or inadequate air supply.
Causes and solutions for soot build-up on the stove glass, including fuel quality, operating temperature, and chimney draft.
Reasons for excessive wear on internal stove parts, such as firing too vigorously or using overly dry wood.
General| Brand | Cast |
|---|---|
| Model | OLGA |
| Category | Wood stove |
| Language | English |
