Table of Contents
1 MACHINE SAFETY 2
2 INTRODUCTION 5
3 THE CASTLE 3 DEGREE SYSTEM 7
4 PACKAGING LIST 8
5 INSTRUCTIONS FOR USE 10
6 POSITIONING THE POCKETS 13
7 VACUUM PORT 15
8 CLAMPING TO A WORK BENCH 16
9 MACHINE ADJUSTMENTS 17
9.1 USING THE THIN STOCK OVERLAY PLATE FOR THINNER STOCK 17
9.2 INSTALLING AND ADJUSTING ROUTER BIT 18
9.3 WEB ADJUSTMENT 21
9.4 PILOT HOLE HEIGHT ADJUSTMENT 22
10 USING THE OPTIONAL WORK STOPS 22
11 MOTOR, BITS, AND GENERAL INFORMATION 24
12 WARRANTY INFORMATION 30
Note: Do not attempt to perform maintenance or operate this machine until you have read and
understand the information contained in this manual.
To Next Page
Loading...