Cata UBIND60BV - Technical Specification

24
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem
Possible causes
What to do
E4/E5
Temperature sensor failure
Please contact the supplier.
E7/E8
Temperature sensor of the
IGBT failure.
Please contact the supplier.
E2/E3
Abnormal supply voltage
Please inspect whether power supply
is normal. Power on after the power
supply is normal.
E6/E9
Bad induction hob heat
radiation
Please restart after the induction hob
cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
Technical Specification
Induction Hob
UBIND60BV
UBIND60DBV
Cooking Zones
4 Zones
Supply Voltage
220-240V~ 50/60Hz
Installed Electric Power
6800W
Product Size D×W×H(mm)
590×520×58
Building-in Dimensions A×B (mm)
560×490
Induction Hob
UBINDB60BV
Cooking Zones
4 Zones
Supply Voltage
220-240V~ 50/60Hz
Installed Electric Power
7200W
Product Size D×W×H(mm)
590×520×58
Building-in Dimensions A×B (mm)
560×490