To Next PageTo Next Page
Need help?Do you have a question about the Cateye Velo Wireless + and is the answer not in the manual?
Instructions for mounting the bracket onto the bicycle stem.
Steps for attaching the sensor to the bicycle and the magnet to the spoke.
Clear all data, select speed units (km/h or mph), and set tire size.
Setting the device's internal clock to 12-hour or 24-hour format.
Describes the device's operational sequence and data display.
Critical safety advice and cautions for device operation and installation.
Specific guidance on sensor and magnet placement and distance.
Technical details of the computer and sensor components, including battery and dimensions.
Details on limited warranty, service addresses, and contact information.
General| Functions | Current speed, Maximum speed, Average speed, Trip distance, Total distance, Elapsed time, Clock |
|---|---|
| Wireless Transmission | Yes |
| Clock | Yes |
| Display | LCD |
| Water Resistance | IPX7 |
| Type | Bicycle Computer |
| Total Distance Range | 0.0～9999.9 km [mile] |
| Trip Distance Range | 0.00~9999.99 km [mile] |
| Battery | Computer: CR2032 x 1, Sensor: CR2032 x 1 |
| Battery Life | Computer: approx 1 year (1hr use per day) |
| Mount Size | 22-32 mm (handlebar or stem) |
| Tire Size Compatibility | 100 to 2999 mm (default: 2096 mm) |
