Cattani turbo smart - Page 4

SMART User Maintenance Guide
04
Daily Maintenance
1. Fill the Pulse Cleaner with 2.5 litres
ofwarm water.
2. Each line on the inside of the Pulse
Cleaner represents 1 litre, so ll it up
to halfway between the second and
third line.
3. Place the Puli-Jet Gentle on
alevelandsteady surface.
4. Slightly unscrew the red cap (i.e. 1 - 2
revolutions), but do notcompletely
unscrew it.
5. Squeeze the bottle softly to force
solution into the measuring dispenser.
6. Continue to squeeze until the solution
reaches the 30ml mark.