Need help?Do you have a question about the Cattani MICRO SMART and is the answer not in the manual?
Information about electrical, biological, and general danger signs.
Advice on unpacking, installation location, and environmental conditions.
Describes the functioning of the aspirating unit and centrifugal separator.
Information about the optional Amalgam Separator.
Daily checks, cleaning, and filter maintenance procedures.
Periodic checks on ventilation and plant room conditions.
Annual checks, dust removal, and fan cleaning.
Checks on hoses, centrifugal separator, and recirculation valve.
Replacement of rubber parts and motor bearings.
Overview of main, A1, A2, and A3 menu structures and their content.
Details for accessing Drive Status, User, System, and Factory menus.
Displays blower frequency, voltage, and current.
Displays pump frequency, voltage, and current.
Displays detected and maximum temperatures.
Displays power bus voltage and ripple.
Explanation of the machine's running mode.
Setting vacuum, language, and codes within user parameters.
Parameters related to minimum vacuum settings.
Parameters related to medium vacuum settings.
Blower frequency and current limits for medium vacuum.
Parameters for surgery vacuum settings.
Configuration of delay times and running options.
Configuration of network address and Zig-Bee channels.
Initiating a search for connected devices.
Selecting a device to view its operating parameters.
Procedures for accessing User and System Parameter menus using passwords.
Viewing system data and inverter operational parameters.
Setting up email recipients for alarm notifications.
Displays alarms with error codes and descriptions.
Full history of alarms and recorded operation cycles.
Details warranty terms, liability limitations, and unauthorized modifications.
Information on manual updates and WEEE device regulations.
Specifies temperature, humidity, and stacking limits for packages.
Steps for cleaning, disinfecting, and packing used appliances.
Information about electrical, biological, and general danger signs.
Advice on unpacking, installation location, and environmental conditions.
Describes the functioning of the aspirating unit and centrifugal separator.
Information about the optional Amalgam Separator.
Daily checks, cleaning, and filter maintenance procedures.
Periodic checks on ventilation and plant room conditions.
Annual checks, dust removal, and fan cleaning.
Checks on hoses, centrifugal separator, and recirculation valve.
Replacement of rubber parts and motor bearings.
Overview of main, A1, A2, and A3 menu structures and their content.
Details for accessing Drive Status, User, System, and Factory menus.
Displays blower frequency, voltage, and current.
Displays pump frequency, voltage, and current.
Displays detected and maximum temperatures.
Displays power bus voltage and ripple.
Explanation of the machine's running mode.
Setting vacuum, language, and codes within user parameters.
Parameters related to minimum vacuum settings.
Parameters related to medium vacuum settings.
Blower frequency and current limits for medium vacuum.
Parameters for surgery vacuum settings.
Configuration of delay times and running options.
Configuration of network address and Zig-Bee channels.
Initiating a search for connected devices.
Selecting a device to view its operating parameters.
Procedures for accessing User and System Parameter menus using passwords.
Viewing system data and inverter operational parameters.
Setting up email recipients for alarm notifications.
Displays alarms with error codes and descriptions.
Full history of alarms and recorded operation cycles.
Details warranty terms, liability limitations, and unauthorized modifications.
Information on manual updates and WEEE device regulations.
Specifies temperature, humidity, and stacking limits for packages.
Steps for cleaning, disinfecting, and packing used appliances.
General| Number of Surgeries | 1 |
|---|---|
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Power | 0.6 kW |
| Speed | 2800 rpm |
| Material | High-quality plastic |
To Next Page
