6. Receivers
This section describes the 23R08A, 23R14A, 23R22 and 23RCAN receivers. Many of the features are common in
all receivers; therefore, descriptions have been combined for the purposes of this document.
CommandPro
®
series receivers contain sophisticated programs coupled to electrically tough interfaces. These
power systems offer several advantages:
• Safety – Three levels of safety ensure safe operation even in the event of circuit failures.
• Reliability – Wide use of surface mount parts and few interconnections between boards provide greater
reliability and easier service.
• Simplicity – Easy diagnostics and simple troubleshooting procedures makes servicing quick and easy.
• Versatility – Programmability plus many options allow this system to work on virtually any equipment
without modifications to the basic control system.
The receivers consist of one or two circuit boards mounted inside either a NEMA 4 steel enclosure or a NEMA 12
extruded aluminium enclosure. Figure 2, Figure 3, and Figure 4 show the general arrangement of the receivers.
To Next Page
Loading...