5 / 15
can copy or play the file in the storage directly.
7) USB Audio: N5 MK2S can output USB Audio signal and connect to an USB DAC device for
outboard digital audio conversion, or it can accept an USB Audio source (such as a computer)
and function as an USB DAC.
8) S/PDIF: Connect to external audio device with coaxial input via a Type C to Coaxial S/PDIF
cable.
1) The device will start to charge up the battery when you connect the device to a USB charger or
the USB port of a computer via USB cable (as supplied). The battery installed in the device is
rated at 3000mAH (3.8V), it will take around 3.5 hours to completely charge up by a 2.0A
charger
2) We recommend our customer to use high quality charger with N5 MK2S because inferior
charger might introduced high risk in the long run. Please charge up the battery at room
temperature. Charging at very high or low temperature might cause battery failure during
the charging process. When N5 MK2S is connected to a USB charger, it can play music while
charging is in progress. If N5 MK2S is connected to an USB port of a computer and charging,
the player will stop playing music.
3) Charging Recommendation: Appropriate battery care can extend the lifetime of the battery
and the player. Lithium Polymer battery does not have memory effect, it can be charged
regardless of its current capacity, given that it has no negative effect in its performance. Fully
discharging and charging the battery repeatedly is not recommended. If the battery have
been used without a complete full discharge after a very long period, it might result in
inaccurate gauge and lead to incorrect battery capacity estimation, a full discharge followed by
a full charge immediately will calibrate the gauge.
2. Add Music Files to Player
You can add music file to the Digital Audio Player by one of the following methods.
1. Internal Storage: Set the USB mode of the player to MTP, connect the N5 MK2S player to a
compute with an appropriate USB cable, and copy music files to a subfolder (normally by the
name of Music) at the internal storage (32GB).
2. Expandable Storage: Copy the music files to a TF card and insert the TF card into either Slot 1 or
Slot 2 of the side panel of the N5 MK2S player.
3. OTG Storage: Insert an external storage device to the Type-C Connector at the bottom of N5 MK2S
with appropriate cable, copy music file to Internal Storage or Expandable Storage, or playback the
music files on the OTG storage directly.
4. Streaming: Turn on Wifi and connect N5 MK2S to Internet, install appropriate third party
applications (such as Tidal or Spotify), playback or download music from subscribed streaming
service.
5. Networking: Turn on WiFi and connect N5 MK2S to a LAN, playback or download music from NAS
or shared folder of connected computer facilities.
To Next Page
Loading...