EasyManua.ls Logo

CBTL 10134 - Brewing, Removing Beverage, and Cleaning

CBTL 10134
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
2
Brewing Beverages (continued)
9
In approximately 3 seconds, a hot, steaming
beverage will ow through the dispensing spout
into the cup or mug on the drip plate.
CAUTION: This beverage system
dispenses extremely hot water.
To avoid burns or personal
injury, NEVER raise the capsule
lever while brewing. NEVER
remove water tank or used
capsule drawer while brewing.
NEVER place your ngers under
the beverage dispensing spout
while brewing.
10
11
Carefully remove the freshly brewed beverage.
Raise and lower the capsule lever to eject the used capsule into
the drawer. Pull the used capsule drawer out, remove used capsule
and slide drawer back into position. Make sure the drip plate rests
properly on the drip tray at the base of the capsule drawer.
CAUTION: Capsule may be hot.
Use care when handling and
disposing.
IMPORTANT:
Traces of the just-dispensed beverage may
remain inside the machine. To ensure rich, clear
avors, when switching from one beverage to
another, we suggest rinsing the beverage system
by brewing 1 (12-oz.) cup of plain water (do not
insert a capsule) between beverages.

Related product manuals