CCV IM30 - Buttons and MDB Status LED

6. Connectors
6.1 Power/ Digital IO
The terminal can be powered by PWR-DIG I/O
connector (6pin WAGO, plug 733-104).
This connector also enables a digital IO port.
1
DIGI_IN3
DIGI_IN2
2
DIGI_IN1
3
PWR-DIG I/O (WAGO 6pin)
PIN
DIGI_OUT1
4
5
GND
MDB_PWR_OUT
6
6.2 RS232-A (cash register)
RJ45 8-poles, high speed interface (default 115.2
kbps/ switchable up to 921.6 kbps), shielded, hardware
handshake, max. cable length 100 cm.
1
POWER_IN
RX
2
TX
3
Signal PIN