» Keep sucient distance to mobile phones and wireless devices because these may cause interference. This is
not necessary for devices that are able to perform a contactless transaction (e.g. mobile with NFC interface).
» Please obtain regular information about available and/or necessary updates or product extensions (please
call the hotline of your network operator).
» Following software updates, telephone installation changes, or other changes to the terminal the complete
payment operation including closing should be tested.
» Damage to or removal of the identication labels and seals on the equipment will void your warranty.
» If any cables become damaged, use a replacement.
» Do not insert unknown materials into any port on the terminal, this may cause serious damage to the device.
» The terminal is designed for outdoor use; however, during normal use its surface should still be keep clear of
dirt and possible liquid contamiants.
» While the terminal is designed to resist ingress of dust and liquids such as water hoses. Keep the back of the
device away from dust and liquids as much as possible.
» Maintain a sucient distance to other electrical devices - this can lead to malfunctions.
» Make sure the various cables connect to provide the appropriate voltages at the proper pins.
» If you want to reset or change your terminal please make sure that all transactions are transferred to your
payment provider by an end of day closure.
» The terminal contains tamper-proong features; these circuits will trigger if the device is disassembled, at
which point it will have to be rearmed before the device is ready to resume operation.
» Check the integrity of the terminal. Check if the terminal shows damage and manipulation and the
seal is unbroken. If you detect damage, tampering or a broken seal do not operate the terminal.
Contact your payment provider or the CCV support at hotline@de.ccv.eu.
To Next Page
Loading...
