To turn o the fan or reduce
fan speed, move your hand
from right to left several times
in standby mode until the
display shows . Move your
hand one more time and the
appliance will turn o (gesture
control will still be active)
To activate the appliance,
move your hand across the
sensors from left to right. The
display will show .
To turn on the fan or increase
fan speed, move your hand
from left to right several times
in standby mode. The display
will show the current fan speed
after each hand gesture.
To turn the lighting on or o,
hover your hand about 10 cm
above sensor 2.
8 | Instruction Manual
To Next Page
Loading...
