CDA CW897 - Preparation; Unpacking and Initial Checks

PreparationPreparation
PreparationPreparation
Preparation
Unpacking
Remove all packing materials.
Check attached accessories and materials.
Checking should be conducted with reference to the Packing
List. Contact the local distributor if shortage is found.
Ensure that the refrigerator is properly lo-
cated.
(Refer to the section of "Location")
Clean the refrigerator before using.
(Refer to the section of "Cleaning")
Standby status
Connect the power source a minimum of 30 minutes after the
refrigerator has been sited and cleaned.
5
Caution:
After unpacking, write down the model and delivery number of the refrigerator on
the Warranty for future inquiries.