6
Care and maintenance
IMPORTANT : DO NOT PERFORM MAINTENANCE OR CLEAN-
ING OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.
Cleaning
You should use a nonabrasive cleaner. Any abrasive cleaner (including
Cif) will scratch the surface and could erase the
control panel markings.
You can clean your extractor eectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean microfibre cloth.
Cleaning the (rectangular) grease filter
The grease filter captures grease particles in the air, so is therefore
subject to clogging depending on the frequency of use of the
appliance.
In order to prevent fire hazard it is recommended to clean the
grease filter at a maximum of 2 month intervals by carrying out these
instructions:
Depending on model, you may have either acrylic or aluminium
grease filter(s).
To Next Page
Loading...
