CDA FW253 - Installation Guide; Installation Location and Requirements

18
fig. 2
fig. 3
KIT
1
2
3
4
5
6
9
10
7
8
9
10
Installation
This appliance must never be installed close to heat sources i.e.
heating elements, radiators, cookers or in damp places.
The appliance should be mounted on a piece of wood (for example
a section of worktop or kitchen carcass) if a raised oor is to be
tted, if the kitchen oor is to be tiled after installation, or if the
installation height of the appliance is greater than 850 mm.
Contents and Tools
Required
Fig. 2 - Installation kit contents
1. Wood screw (17 pcs)
2. Decor door fixing bracket
3. Decor door base fixings (2 pcs)
4. Decorative cover
5. Screw
6. Top bracket
Fig. 3 - Tools required
7. Spirit level
8. Spanner
9. Setsquare
10. Flathead screwdriver